Speaker Plate Install Instructions

  1. Line plate up on side of console, it’s helpful to have someone else looking into the console from the opposite side to help determine alignment.
  2. Once aligned, use a sharpie to mark holes.
  3. Once holes are marked, check to be sure you will not be drilling into anything important such as coolant lines or wiring.
  4. Using a 11/32” drill bit and a drill bit depth stop, set it so that you just drill through the plastic (tape wrapped around drill bit also works if you don’t have a depth stop). Carefully drill out the marked holes.
  5. Align plates, install push pins.
  6. You are now ready to add speakers in the console!